SH-PolarWax
- Polar phase: Crossbond™ polyethylene glycol
- Low-bleed PEG column ensures long column lifetimes.
- Rugged enough to withstand repeated water injections.
- Equivalent to USP G14, G15, G16, G20, and G39 phases.
- Similar phases: Stabilwax, HP-Innowax, CP-Wax 52 CB, VF-WAX MS, Supelcowax-10, ZB-Wax Plus, AT-WAX, EC-WAX
P/N | ID | df (Film Thickness) | Length | Temp. Range |
---|---|---|---|---|
227-36343-01 | 0.10 mm | 0.10 μm | 10 m | 40 to 250/260°C |
227-36357-01 | 0.18 mm | 0.18 μm | 20 m | 40 to 250°C |
227-36246-01 | 0.25 mm | 0.10 μm | 30 m | 40 to 250/260°C |
227-36246-02 | 0.25 mm | 0.10 μm | 60 m | 40 to 250/260°C |
227-36305-02 | 0.25 mm | 0.25 μm | 30 m | 40 to 250/260°C |
227-36247-01 | 0.25 mm | 0.25 μm | 50 m | 40 to 250/260°C |
227-36247-02 | 0.25 mm | 0.25 μm | 60 m | 40 to 250/260°C |
227-36248-01 | 0.25 mm | 0.50 μm | 30 m | 40 to 250/260°C |
227-36248-02 | 0.25 mm | 0.50 μm | 60 m | 40 to 250/260°C |
227-36249-01 | 0.32 mm | 0.10 μm | 30 m | 40 to 250°C |
227-36249-02 | 0.32 mm | 0.10 μm | 60 m | 40 to 250°C |
221-75972-30 | 0.32 mm | 0.25 μm | 30 m | 40 to 250/260°C |
227-36250-01 | 0.32 mm | 0.25 μm | 60 m | 40 to 250/260°C |
227-36251-01 | 0.32 mm | 0.50 μm | 30 m | 40 to 250/260°C |
221-75975-60 | 0.32 mm | 0.50 μm | 60 m | 40 to 250/260°C |
227-36252-01 | 0.32 mm | 1.00 μm | 30 m | 40 to 240/260°C |
227-36252-02 | 0.32 mm | 1.00 μm | 60 m | 40 to 240/260°C |
227-36253-01 | 0.53 mm | 0.10 μm | 30 m | 40 to 250/260°C |
227-36254-01 | 0.53 mm | 0.25 μm | 30 m | 40 to 250/260°C |
227-36254-02 | 0.53 mm | 0.25 μm | 60 m | 40 to 250/260°C |
227-36255-01 | 0.53 mm | 0.50 μm | 30 m | 40 to 250/260°C |
227-36255-02 | 0.53 mm | 0.50 μm | 60 m | 40 to 250/260°C |
221-75979-30 | 0.53 mm | 1.00 μm | 30 m | 40 to 240/250°C |
227-36256-01 | 0.53 mm | 1.00 μm | 60 m | 40 to 230/240°C |
227-36257-01 | 0.53 mm | 1.50 μm | 30 m | 40 to 230/240°C |
227-36257-02 | 0.53 mm | 1.50 μm | 60 m | 40 to 220/230°C |
227-36258-01 | 0.53 mm | 2.00 μm | 30 m | 40 to 220/230°C |